Working principle of High Pressure Hydrogenation Valve

1. When the High Pressure Hydrogenation Valve is connected to the circuit and the system gas source, the air enters the A cylinder (B cylinder) through the pipe A or B pipe to push the piston to one end, thereby driving the rotating shaft and the ball core to rotate 90°.

2. The top of the High Pressure Hydrogenation Valve is linked to the visual device. When the green mark points to the word "open", the valve is open.
3. When the green light of the reply signal light is on, the valve is in the open position, and when the red light is on, the valve is in the closed position
4. The positioner can adjust the valve pipeline flow
5. The valve seat adopts an elastic sealing structure, which is reliable and easy to open and close.
6. The Valve Stem adopts a bottom-mounted structure with an inverted seal. When the valve cavity is abnormally pressurized, the valve stem will not be impacted.
7. The pneumatic piston actuator is made of low-friction material to make the bearing sleeve, and the inner and outer surfaces of the cylinder body are hard anodized for corrosion protection, which greatly improves the service life of the cylinder.
8. The High Pressure Hydrogenation Valve is directly converted into a power control switch. There are two conversions: power on and power off.