Globe Valve by structure

1. Floating pneumatic ball Universal Valve The ball of the Globe Valve is floating. Under the pressure of the medium, the ball can produce a certain displacement and press tightly on the sealing surface of the outlet to ensure the sealing of the outlet. The floating pneumatic ball Universal Valve has a simple structure and good sealing, but the load of the working medium borne by the ball is all transmitted to the outlet sealing ring. Therefore, it is necessary to consider whether the sealing ring material can withstand the working load of the ball medium. This structure is widely used in medium and low pressure Universal Valve.

2. Fixed ball Globe Valve

The ball of the Globe Valve is fixed and does not move after being pressurized.

Fixed ball Universal Valve are all equipped with floating valve seats. After being pressurized by the medium, the valve seat moves, so that the sealing ring is pressed tightly on the ball to ensure sealing. Bearings are usually installed on the upper and lower shafts of the ball, with small operating torque, suitable for high-pressure and large-diameter valves. In order to reduce the operating torque of the Globe Valve and increase the reliability of the seal, an oil-sealed Universal Valve has appeared in recent years. It not only injects special lubricating oil between the sealing surfaces to form an oil film, but also enhances the sealing performance and reduces the operating torque. It is more suitable for high-pressure and large-caliber Universal Valve.

3. Elastic ball Globe Valve The ball of the Globe Valve is elastic. The ball and the valve seat seal ring are made of metal materials. The sealing pressure ratio is very large. The pressure of the medium itself cannot meet the sealing requirements, and external force must be applied. This valve is suitable for high-temperature and high-pressure media. The elastic ball is elastic by opening an elastic groove at the lower end of the inner wall of the ball. When closing the channel, the wedge head of the Valve Stem is used to expand the ball and press it against the valve seat to achieve sealing. Before turning the ball, loosen the wedge head first, and the ball will return to its original shape, so that a small gap appears between the ball and the valve seat, which can reduce the friction and operating torque of the sealing surface. Globe Valve can be divided into straight-through, three-way and right-angle types according to their channel positions. The latter two Universal Valve are used to distribute media and change the flow direction of media.