Correctly install Programmable Switch Butterfly Valve to improve production efficiency

Whether the Programmable Switch Butterfly Valve is properly installed has a direct impact on the normal operation of the Programmable Switch Butterfly Valve and the production efficiency of the equipment. The Programmable Switch Butterfly Valve must be installed according to the formal installation requirements so that the Programmable Switch Butterfly Valve and equipment can achieve optimal working efficiency.

1. Before installing the Programmable Switch Butterfly Valve, the pipeline must be purged with pressurized steam to remove debris in the pipeline.
2. A filter should be installed in front of the Programmable Switch Butterfly Valve to ensure that the Programmable Switch Butterfly Valve is not blocked by pipeline debris, and the filter should be cleaned regularly.
3. Valves should be installed before and after the Programmable Switch Butterfly Valve, so that the Programmable Switch Butterfly Valve can be repaired at any time.
4. The direction of the condensate water should be consistent with the installation arrow mark of the Programmable Switch Butterfly Valve.
5. The Programmable Switch Butterfly Valve should be installed at a low position at the equipment outlet to discharge condensation water in a timely manner to avoid steam blockage in the pipeline.
6. If there is no place to install a Programmable Switch Butterfly Valve at the lower part of the equipment, a reverse bend should be added at the low position of the water outlet to raise the condensation water level before installing a Programmable Switch Butterfly Valve to avoid steam lock.
7. The outlet pipe of the Programmable Switch Butterfly Valve should not be immersed in water.
8. Mechanical Programmable Switch Butterfly Valve must be installed horizontally.
9. Do not install steam Programmable Switch Butterfly Valve in series.
10. Each piece of equipment should be equipped with its own Programmable Switch Butterfly Valve.
11. The thermostatic type Programmable Switch Butterfly Valve needs an uninsulated supercooling pipe of more than one meter in front of it. Other forms of Programmable Switch Butterfly Valve should be as close as possible to the equipment.
12. When selecting a Programmable Switch Butterfly Valve for drum drying (type with siphon) equipment, please indicate: Use a Programmable Switch Butterfly Valve rotor pump with an anti-vapor lock device to avoid vapor lock in the equipment.
13. If there is condensate recovery after the Programmable Switch Butterfly Valve, the outlet pipe of the Programmable Switch Butterfly Valve should be connected to the main pipe from above the recovery main pipe to reduce back pressure and prevent backflow.
14. If condensate is recovered after the programmable butterfly valve is switched on and off, pipelines with different pressure levels must be recovered separately.
15. The condensate recovery main pipe after the Programmable Switch Butterfly Valve cannot climb the slope, which will increase the back pressure of the Programmable Switch Butterfly Valve.
16. After the Programmable Switch Butterfly Valve, a Check Valve must be installed before the condensate enters the recovery main pipe to prevent the condensate from flowing back.
17. Install a Programmable Switch Butterfly Valve on the steam pipeline. The main pipe should have a condensate collection well close to the radius of the main pipe, and then use a small pipe to lead it to the Programmable Switch Butterfly Valve.
18. If the mechanical Programmable Switch Butterfly Valve is not used for a long time, remove the drain screw to drain the water inside to prevent freezing.
19. If the Programmable Switch Butterfly Valve is found to be running out of steam, drain the sewage and clean the filter in time. Check it frequently according to the actual usage, and repair it at any time if there is any failure. It should be inspected at least once a year to remove impurities inside. The Programmable Switch Butterfly Valve is considered a small accessory in the entire steam system, but it has a great impact on the system work and economic operation. Therefore, the maintenance and repair of the Programmable Switch Butterfly Valve are also crucial. Only by paying enough attention to the Programmable Switch Butterfly Valve The important role of valves in production. Frequent maintenance can ensure that the Programmable Switch Butterfly Valve is always in good working condition, so as to ensure the best energy saving effect and improve economic benefits.